Eaton MCL2012V2-390-R 39.0 nH Chip Inductor, 100 Q
Eaton MCL2012V2-390-R 39.0 nH Chip Inductor, 100 Q

Eaton MCL2012V2-390-R 39.0 nH Chip Inductor, 100 Q

Share
MCL2012V2-390-R: multilayer chip inductor, 39.0 nH 300, Q 100, SRF 15 MHz, 1 mA, DCR 1100000 mOhm.
    • Product Details
    • Download

    Eaton MCL2012V2-390-R 39.0 nH Chip Inductor, 100 Q

    MCL2012V2-390-R at a glance: multilayer chip inductor, 39.0 nH 300, Q 100, SRF 15 MHz, 1 mA, DCR 1100000 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCL2012V2-390-R
    Inductance39.0 nH 300
    Q minimum100
    DCR maximum @ +25 °C1100000 mOhm
    Rated current maximum1 mA
    SRF minimum15 MHz
    Test frequency50 MHz
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10929

    Mechanical Dimensions & Pad Layout

    MCL2012V2-390-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10929: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 39.0 nH 300 with a minimum Q of 100 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 100 means the part’s loss is about 1 % of its reactance in that band.

    Self-resonance is quoted as 15 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 15 MHz is the design headroom.

    Within the MCL2012V2 family this is value 19 of 32, in a range that runs from 0.002 to 0.47 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products