Eaton MCL2012V2-8R2-R 8.2 nH Chip Inductor, 100 Q
Eaton MCL2012V2-8R2-R 8.2 nH Chip Inductor, 100 Q

Eaton MCL2012V2-8R2-R 8.2 nH Chip Inductor, 100 Q

Share
MCL2012V2-8R2-R: multilayer chip inductor, 8.2 nH 500, Q 100, SRF 15 MHz, 0 mA, DCR 2500000 mOhm.
    • Product Details
    • Download

    Eaton MCL2012V2-8R2-R 8.2 nH Chip Inductor, 100 Q

    MCL2012V2-8R2-R at a glance: multilayer chip inductor, 8.2 nH 500, Q 100, SRF 15 MHz, 0 mA, DCR 2500000 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCL2012V2-8R2-R
    Inductance8.2 nH 500
    Q minimum100
    DCR maximum @ +25 °C2500000 mOhm
    Rated current maximum0 mA
    SRF minimum15 MHz
    Test frequency50 MHz
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10929

    Outline Drawing

    MCL2012V2-8R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10929: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 8.2 nH 500 with a minimum Q of 100 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 100 means the part’s loss is about 1 % of its reactance in that band.

    Self-resonance is quoted as 15 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 15 MHz is the design headroom.

    Within the MCL2012V2 family this is value 11 of 32, in a range that runs from 0.002 to 0.47 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products