Eaton MCL2V0603-470-R 47.0 nH SMD Inductor, SRF 1500 MHz
Eaton MCL2V0603-470-R 47.0 nH SMD Inductor, SRF 1500 MHz

Eaton MCL2V0603-470-R 47.0 nH SMD Inductor, SRF 1500 MHz

Share
MCL2V0603-470-R: multilayer chip inductor, 47.0 nH ±5%, Q 12, SRF 1500 MHz, 100 mA, DCR 2600 mOhm.
    • Product Details
    • Download

    Eaton MCL2V0603-470-R 47.0 nH SMD Inductor, SRF 1500 MHz

    MCL2V0603-470-R at a glance: multilayer chip inductor, 47.0 nH ±5%, Q 12, SRF 1500 MHz, 100 mA, DCR 2600 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCL2V0603-470-R
    Inductance47.0 nH ±5%
    Q minimum12
    DCR maximum @ +25 °C2600 mOhm
    Rated current maximum100 mA
    SRF minimum1500 MHz
    Test frequency300 MHz
    Test voltage50 mV
    Package0.6 x 0.3 mm
    Size code0603 (0201)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11227

    Mechanical Dimensions & Pad Layout

    MCL2V0603-470-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11227: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 47.0 nH ±5% with a minimum Q of 12 at 300 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 12 means the part’s loss is about 8.33 % of its reactance in that band.

    Self-resonance is quoted as 1500 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 1500 MHz is the design headroom.

    Within the MCL2V0603 family this is value 55 of 62, in a range that runs from 0.001 to 0.12 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communiations; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message