Eaton MCLA1005V2-101-R 100.0 nH Chip Inductor 0402
Eaton MCLA1005V2-101-R 100.0 nH Chip Inductor 0402

Eaton MCLA1005V2-101-R 100.0 nH Chip Inductor 0402

Share
MCLA1005V2-101-R: multilayer chip inductor, 100.0 nH ±5%, Q 8, SRF 700 MHz, 150 mA, DCR 2600 mOhm.
    • Product Details
    • Download

    Eaton MCLA1005V2-101-R 100.0 nH Chip Inductor 0402

    MCLA1005V2-101-R at a glance: multilayer chip inductor, 100.0 nH ±5%, Q 8, SRF 700 MHz, 150 mA, DCR 2600 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMCLA1005V2-101-R
    Inductance100.0 nH ±5%
    Q minimum8
    DCR maximum @ +25 °C2600 mOhm
    Rated current maximum150 mA
    SRF minimum700 MHz
    Test frequency100 MHz
    Test voltage50 mV
    Package1.0 x 0.5 mm
    Size code1005 (0402)
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10974

    Mechanical Drawing

    MCLA1005V2-101-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10974: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 100.0 nH ±5% with a minimum Q of 8 at 100 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 8 means the part’s loss is about 12.5 % of its reactance in that band.

    Self-resonance is quoted as 700 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 700 MHz is the design headroom.

    Within the MCLA1005V2 family this is value 39 of 45, in a range that runs from 0.001 to 0.33 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antennas tuning.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products