Eaton MCLA2012V1-R068-R 0.068 nH Chip Inductor 0805
Eaton MCLA2012V1-R068-R 0.068 nH Chip Inductor 0805

Eaton MCLA2012V1-R068-R 0.068 nH Chip Inductor 0805

Share
MCLA2012V1-R068-R: multilayer chip inductor, 0.068 nH ±10, Q 25, SRF 280 MHz, 300 mA, DCR 200 mOhm.
    • Product Details
    • Download

    Eaton MCLA2012V1-R068-R 0.068 nH Chip Inductor 0805

    MCLA2012V1-R068-R at a glance: multilayer chip inductor, 0.068 nH ±10, Q 25, SRF 280 MHz, 300 mA, DCR 200 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberMCLA2012V1-R068-R
    Inductance0.068 nH ±10
    Q minimum25
    DCR maximum @ +25 °C200 mOhm
    Rated current maximum300 mA
    SRF minimum280 MHz
    Test frequency50 MHz
    Test voltage50 mV
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10977

    Outline Drawing

    Outline drawing and pad layout are on page 2 of Eaton Technical Data 10977; the package column above gives the body size in millimetres.

    The Figures Explained

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 0.068 nH ±10 with a minimum Q of 25 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 25 means the part’s loss is about 4 % of its reactance in that band.

    Self-resonance is quoted as 280 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 280 MHz is the design headroom.

    Within the MCLA2012V1 family this is value 3 of 30, in a range that runs from 0.047 to 12 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products