Eaton MCLA2012V1-R390-R 0.39 nH SMD Inductor, SRF 135 MHz
Eaton MCLA2012V1-R390-R 0.39 nH SMD Inductor, SRF 135 MHz

Eaton MCLA2012V1-R390-R 0.39 nH SMD Inductor, SRF 135 MHz

Share
MCLA2012V1-R390-R: multilayer chip inductor, 0.39 nH ±10, Q 25, SRF 135 MHz, 200 mA, DCR 500 mOhm.
    • Product Details
    • Download

    Eaton MCLA2012V1-R390-R 0.39 nH SMD Inductor, SRF 135 MHz

    MCLA2012V1-R390-R at a glance: multilayer chip inductor, 0.39 nH ±10, Q 25, SRF 135 MHz, 200 mA, DCR 500 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMCLA2012V1-R390-R
    Inductance0.39 nH ±10
    Q minimum25
    DCR maximum @ +25 °C500 mOhm
    Rated current maximum200 mA
    SRF minimum135 MHz
    Test frequency25 MHz
    Test voltage50 mV
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10977

    Dimensions and Pad Layout

    Outline drawing and pad layout are on page 2 of Eaton Technical Data 10977; the package column above gives the body size in millimetres.

    The Figures Explained

    This is a surface-mount multilayer inductor: printed coil, sintered body, silver terminations. The value is quoted at a defined test frequency because at these inductances the measurement conditions matter as much as the part.

    The row reads 0.39 nH ±10 with a minimum Q of 25 at 25 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 25 means the part’s loss is about 4 % of its reactance in that band.

    Self-resonance is quoted as 135 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 135 MHz is the design headroom.

    Within the MCLA2012V1 family this is value 12 of 30, in a range that runs from 0.047 to 12 nH.

    Where This Series Fits

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message