Eaton MCLA3225V1-120-R 12.0 uH Chip Inductor, 35 Q
Eaton MCLA3225V1-120-R 12.0 uH Chip Inductor, 35 Q

Eaton MCLA3225V1-120-R 12.0 uH Chip Inductor, 35 Q

Share
MCLA3225V1-120-R: multilayer chip inductor, 12.0 uH ±10, Q 35, SRF 20 MHz, 400 mA, DCR 700 mOhm.
    • Product Details
    • Download

    Eaton MCLA3225V1-120-R 12.0 uH Chip Inductor, 35 Q

    MCLA3225V1-120-R at a glance: multilayer chip inductor, 12.0 uH ±10, Q 35, SRF 20 MHz, 400 mA, DCR 700 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCLA3225V1-120-R
    Inductance12.0 uH ±10
    Q minimum35
    DCR maximum @ +25 °C700 mOhm
    Rated current maximum400 mA
    SRF minimum20 MHz
    Test frequency2 MHz
    Test voltage50 mV
    Package3.2 x 2.5 mm
    Size code3225 (1210)
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10979

    Outline Drawing

    Outline drawing and pad layout are on page 2 of Eaton Technical Data 10979; the package column above gives the body size in millimetres.

    The Figures Explained

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 12.0 uH ±10 with a minimum Q of 35 at 2 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 35 means the part’s loss is about 2.86 % of its reactance in that band.

    Self-resonance is quoted as 20 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 20 MHz is the design headroom.

    Within the MCLA3225V1 family this is value 14 of 14, in a range that runs from 1 to 12 nH.

    Where This Series Fits

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products