Eaton MCLA4532V1-1R8-R 1.8 uH Chip Inductor, 35 Q
Eaton MCLA4532V1-1R8-R 1.8 uH Chip Inductor, 35 Q

Eaton MCLA4532V1-1R8-R 1.8 uH Chip Inductor, 35 Q

Share
MCLA4532V1-1R8-R: multilayer chip inductor, 1.8 uH ±10, Q 35, SRF 45 MHz, 600 mA, DCR 650 mOhm.
    • Product Details
    • Download

    Eaton MCLA4532V1-1R8-R 1.8 uH Chip Inductor, 35 Q

    MCLA4532V1-1R8-R at a glance: multilayer chip inductor, 1.8 uH ±10, Q 35, SRF 45 MHz, 600 mA, DCR 650 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCLA4532V1-1R8-R
    Inductance1.8 uH ±10
    Q minimum35
    DCR maximum @ +25 °C650 mOhm
    Rated current maximum600 mA
    SRF minimum45 MHz
    Test frequency10 MHz
    Test voltage50 mV
    Package4.5 x 3.2 mm
    Size code4532 (1812)
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10980

    Dimensions and Pad Layout

    Outline drawing and pad layout are on page 2 of Eaton Technical Data 10980; the package column above gives the body size in millimetres.

    What the Numbers Mean

    A multilayer chip inductor is a coil printed in layers of ceramic and metal, fired into a single body. There is no winding to buzz or shift, the inductance is set by the printed pattern, and the part sits on the board like any other 0402 or 0603 component. That construction is why these parts are used wherever the value is small and the quantity is large.

    The row reads 1.8 uH ±10 with a minimum Q of 35 at 10 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 35 means the part’s loss is about 2.86 % of its reactance in that band.

    Self-resonance is quoted as 45 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 45 MHz is the design headroom.

    Within the MCLA4532V1 family this is value 4 of 14, in a range that runs from 1 to 12 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products