Eaton MCLA4532V1-2R2-R 2.2 uH Chip Inductor 1812
Eaton MCLA4532V1-2R2-R 2.2 uH Chip Inductor 1812

Eaton MCLA4532V1-2R2-R 2.2 uH Chip Inductor 1812

Share
MCLA4532V1-2R2-R: multilayer chip inductor, 2.2 uH ±10, Q 35, SRF 40 MHz, 500 mA, DCR 650 mOhm.
    • Product Details
    • Download

    Eaton MCLA4532V1-2R2-R 2.2 uH Chip Inductor 1812

    MCLA4532V1-2R2-R at a glance: multilayer chip inductor, 2.2 uH ±10, Q 35, SRF 40 MHz, 500 mA, DCR 650 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMCLA4532V1-2R2-R
    Inductance2.2 uH ±10
    Q minimum35
    DCR maximum @ +25 °C650 mOhm
    Rated current maximum500 mA
    SRF minimum40 MHz
    Test frequency10 MHz
    Test voltage50 mV
    Package4.5 x 3.2 mm
    Size code4532 (1812)
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10980

    Mechanical Dimensions & Pad Layout

    Outline drawing and pad layout are on page 2 of Eaton Technical Data 10980; the package column above gives the body size in millimetres.

    The Figures Explained

    This is a surface-mount multilayer inductor: printed coil, sintered body, silver terminations. The value is quoted at a defined test frequency because at these inductances the measurement conditions matter as much as the part.

    The row reads 2.2 uH ±10 with a minimum Q of 35 at 10 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 35 means the part’s loss is about 2.86 % of its reactance in that band.

    Self-resonance is quoted as 40 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 40 MHz is the design headroom.

    Within the MCLA4532V1 family this is value 5 of 14, in a range that runs from 1 to 12 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: adas; infotainment; wireless communications; wifi, bluetooth, satellite; antenna tuning.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products