Eaton MCQ1V1608-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz
Eaton MCQ1V1608-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz

Eaton MCQ1V1608-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz

Share
MCQ1V1608-1R2-R: multilayer chip inductor, 1.2 uH ±10, Q 25, SRF 65 MHz, 25 mA, DCR 550 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V1608-1R2-R 1.2 uH SMD Inductor, SRF 65 MHz

    MCQ1V1608-1R2-R at a glance: multilayer chip inductor, 1.2 uH ±10, Q 25, SRF 65 MHz, 25 mA, DCR 550 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCQ1V1608-1R2-R
    Inductance1.2 uH ±10
    Q minimum25
    DCR maximum @ +25 °C550 mOhm
    Rated current maximum25 mA
    SRF minimum65 MHz
    Test frequency10 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11101

    Mechanical Drawing

    MCQ1V1608-1R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11101: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    Reading the Data Sheet

    Where a circuit needs a small, stable inductance in a package measured in millimetres, the multilayer chip is the default. Its self-resonant frequency is the practical ceiling – above it the part behaves like a capacitor, so the SRF column is the first thing to check against the operating band.

    The row reads 1.2 uH ±10 with a minimum Q of 25 at 10 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 25 means the part’s loss is about 4 % of its reactance in that band.

    Self-resonance is quoted as 65 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 65 MHz is the design headroom.

    Within the MCQ1V1608 family this is value 18 of 24, in a range that runs from 0.047 to 3.9 nH.

    Positioning in the Range

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Can I replace a wire-wound chip with this part?
    Only if the Q and the current rating suit the circuit. Multilayer parts have lower Q and lower current capability than wire-wound parts of the same size.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products