Eaton MCQ1V1608-R056-R 0.056 nH SMD Inductor, SRF 260 MHz
Eaton MCQ1V1608-R056-R 0.056 nH SMD Inductor, SRF 260 MHz

Eaton MCQ1V1608-R056-R 0.056 nH SMD Inductor, SRF 260 MHz

Share
MCQ1V1608-R056-R: multilayer chip inductor, 0.056 nH ±10, Q 15, SRF 260 MHz, 50 mA, DCR 200 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V1608-R056-R 0.056 nH SMD Inductor, SRF 260 MHz

    MCQ1V1608-R056-R at a glance: multilayer chip inductor, 0.056 nH ±10, Q 15, SRF 260 MHz, 50 mA, DCR 200 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCQ1V1608-R056-R
    Inductance0.056 nH ±10
    Q minimum15
    DCR maximum @ +25 °C200 mOhm
    Rated current maximum50 mA
    SRF minimum260 MHz
    Test frequency50 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11101

    Mechanical Dimensions & Pad Layout

    MCQ1V1608-R056-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11101: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The inductance here is a few nanohenry, which puts the part in RF and high-speed digital territory: matching networks, filter sections, bias chokes on amplifier supplies, and the small isolation inductors that keep clock harmonics out of connectors. The multilayer body keeps the parasitics predictable, and the Q column tells you how much loss the part adds at the test frequency.

    The row reads 0.056 nH ±10 with a minimum Q of 15 at 50 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 15 means the part’s loss is about 6.67 % of its reactance in that band.

    Self-resonance is quoted as 260 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 260 MHz is the design headroom.

    Within the MCQ1V1608 family this is value 2 of 24, in a range that runs from 0.047 to 3.9 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products