Eaton MCQ1V1608-R820-R 0.82 nH Chip Inductor, 20 Q
Eaton MCQ1V1608-R820-R 0.82 nH Chip Inductor, 20 Q

Eaton MCQ1V1608-R820-R 0.82 nH Chip Inductor, 20 Q

Share
MCQ1V1608-R820-R: multilayer chip inductor, 0.82 nH ±10, Q 20, SRF 85 MHz, 50 mA, DCR 1000 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V1608-R820-R 0.82 nH Chip Inductor, 20 Q

    MCQ1V1608-R820-R at a glance: multilayer chip inductor, 0.82 nH ±10, Q 20, SRF 85 MHz, 50 mA, DCR 1000 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMCQ1V1608-R820-R
    Inductance0.82 nH ±10
    Q minimum20
    DCR maximum @ +25 °C1000 mOhm
    Rated current maximum50 mA
    SRF minimum85 MHz
    Test frequency25 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11101

    Outline Drawing

    MCQ1V1608-R820-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11101: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    Reading the Data Sheet

    This is a surface-mount multilayer inductor: printed coil, sintered body, silver terminations. The value is quoted at a defined test frequency because at these inductances the measurement conditions matter as much as the part.

    The row reads 0.82 nH ±10 with a minimum Q of 20 at 25 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 20 means the part’s loss is about 5 % of its reactance in that band.

    Self-resonance is quoted as 85 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 85 MHz is the design headroom.

    Within the MCQ1V1608 family this is value 16 of 24, in a range that runs from 0.047 to 3.9 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    How much does the value drift with temperature?
    The data sheet gives the tolerance band; the drift inside that band is small for this construction because there is no mechanical winding to move.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products