Eaton MCQ1V3216-1R2-R 1.2 uH Chip Inductor, 35 Q
Eaton MCQ1V3216-1R2-R 1.2 uH Chip Inductor, 35 Q

Eaton MCQ1V3216-1R2-R 1.2 uH Chip Inductor, 35 Q

Share
MCQ1V3216-1R2-R: multilayer chip inductor, 1.2 uH ±10, Q 35, SRF 65 MHz, 100 mA, DCR 400 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V3216-1R2-R 1.2 uH Chip Inductor, 35 Q

    MCQ1V3216-1R2-R at a glance: multilayer chip inductor, 1.2 uH ±10, Q 35, SRF 65 MHz, 100 mA, DCR 400 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberMCQ1V3216-1R2-R
    Inductance1.2 uH ±10
    Q minimum35
    DCR maximum @ +25 °C400 mOhm
    Rated current maximum100 mA
    SRF minimum65 MHz
    Test frequency10 MHz
    Test voltage50 mV
    Package3.2 x 1.6 mm
    Size code3216 (1206)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11102

    Mechanical Dimensions & Pad Layout

    MCQ1V3216-1R2-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11102: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    A multilayer chip inductor is a coil printed in layers of ceramic and metal, fired into a single body. There is no winding to buzz or shift, the inductance is set by the printed pattern, and the part sits on the board like any other 0402 or 0603 component. That construction is why these parts are used wherever the value is small and the quantity is large.

    The row reads 1.2 uH ±10 with a minimum Q of 35 at 10 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 35 means the part’s loss is about 2.86 % of its reactance in that band.

    Self-resonance is quoted as 65 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 65 MHz is the design headroom.

    Within the MCQ1V3216 family this is value 18 of 25, in a range that runs from 0.047 to 4.7 nH.

    Series Positioning

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    What happens above the self-resonant frequency?
    The part becomes capacitive. Any filter or matching design has to keep the operating band below SRF, with margin for the tolerance of the value.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message