Eaton MCQ1V3216-R120-R 0.12 nH Chip Inductor, 25 Q
Eaton MCQ1V3216-R120-R 0.12 nH Chip Inductor, 25 Q

Eaton MCQ1V3216-R120-R 0.12 nH Chip Inductor, 25 Q

Share
MCQ1V3216-R120-R: multilayer chip inductor, 0.12 nH ±10, Q 25, SRF 220 MHz, 250 mA, DCR 250 mOhm.
    • Product Details
    • Download

    Eaton MCQ1V3216-R120-R 0.12 nH Chip Inductor, 25 Q

    MCQ1V3216-R120-R at a glance: multilayer chip inductor, 0.12 nH ±10, Q 25, SRF 220 MHz, 250 mA, DCR 250 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMCQ1V3216-R120-R
    Inductance0.12 nH ±10
    Q minimum25
    DCR maximum @ +25 °C250 mOhm
    Rated current maximum250 mA
    SRF minimum220 MHz
    Test frequency25 MHz
    Test voltage50 mV
    Package3.2 x 1.6 mm
    Size code3216 (1206)
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11102

    Mechanical Dimensions & Pad Layout

    MCQ1V3216-R120-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11102: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a surface-mount multilayer inductor: printed coil, sintered body, silver terminations. The value is quoted at a defined test frequency because at these inductances the measurement conditions matter as much as the part.

    The row reads 0.12 nH ±10 with a minimum Q of 25 at 25 MHz. Q is the ratio of reactance to resistance at that frequency, so a Q of 25 means the part’s loss is about 4 % of its reactance in that band.

    Self-resonance is quoted as 220 MHz minimum. Below it the part is inductive; above it the inter-layer capacitance takes over. The margin between the operating band and 220 MHz is the design headroom.

    Within the MCQ1V3216 family this is value 6 of 25, in a range that runs from 0.047 to 4.7 nH.

    Where This Series Fits

    The multilayer chip family covers nanohenry to a few microhenry values in 0402 through 1812 bodies. It is the range where the inductance is too small for a wound part to be practical and where the self-resonant frequency sets the usable band.

    • The rated current is a thermal limit for the part in free air, not a saturation limit. At high ambient the current has to be derated.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: compare SRF against the highest frequency the circuit will see, not just the fundamental.

    Frequently Asked Questions

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Why is the inductance quoted at a test frequency?
    At nanohenry values the parasitic capacitance and the measurement fixture both matter. The value is only meaningful at the frequency stated, and the Q column tells you how much of the reactance is loss at that point.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products