Welcome to our company!
Eaton MDA-1/2-R 500 mA Slow-Blow Fuse - 1/4 x 1-1/4 in, 250 Vac
Share
pEaton MDA-1/2-R — 500 mA, 250 V, time-delay fuse, 200 A at 250 Vac; 10,000 A at 125 Vac interrupting./p
- Product Details
- Download
Eaton MDA-1/2-R 500 mA Slow-Blow Fuse - 1/4 x 1-1/4 in, 250 Vac
Eaton MDA-1/2-R 500 mA Slow-Blow Fuse - 1/4 x 1-1/4 in, 250 Vac belongs to the Eaton range. It carries 500 mA, rated 250 Vac, uses a slow-blow element.
Technical Data
| Parameter | Rating |
|---|---|
| Part number | MDA-1/2-R |
| Voltage rating | 250 Vac |
| Element | single element |
| Typical DC cold resistance | 2,600 mΩ |
| Typical melting I2t | 1.2 A²s |
| End caps | nickel-plated brass |
| Rated current | 500 mA (1/2 A) |
| Body | Ceramic tube, 1/4 x 1-1/4 in (6.3 x 32 mm) |
| Maximum voltage drop | 1,650 mV |
| AC interrupting rating | 200 A at 250 Vac; 10,000 A at 125 Vac |
| Design standard | UL 248-14 |
Design Notes
- Interrupting capability is 200 A at 250 Vac; 10,000 A at 125 Vac — confirm the circuit's prospective fault current stays below this.
- Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
- Do not upsize beyond 500 mA to stop nuisance trips — fix the cause instead.
Where It Is Used
Typical places this fuse turns up:
- EV
Common Questions
What are the ratings of the MDA-1/2-R?
500 mA continuous at 250 Vac, interrupting rating 200 A at 250 Vac; 10,000 A at 125 Vac.
Is the MDA-1/2-R fast-acting or time-delay?
It is slow-blow. It tolerates short inrush surges.
Can the MDA-1/2-R be used on a higher fault-current circuit?
No — its interrupting rating is 200 A at 250 Vac; 10,000 A at 125 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
