Welcome to our company!
Eaton MDL-1/10-R 100 mA Slow-Blow Fuse - 1/4 x 1-1/4 in, 250 Vac
Share
pEaton MDL-1/10-R — 100 mA, 250 V, time-delay fuse, 35 A at 250 Vac; 10,000 A at 125 Vac interrupting./p
- Product Details
- Download
Eaton MDL-1/10-R 100 mA Slow-Blow Fuse - 1/4 x 1-1/4 in, 250 Vac
Eaton MDL-1/10-R 100 mA Slow-Blow Fuse - 1/4 x 1-1/4 in, 250 Vac belongs to the Eaton range. It carries 100 mA, rated 250 Vac, uses a slow-blow element.
Technical Data
| Parameter | Rating |
|---|---|
| Part number | MDL-1/10-R |
| Typical voltage drop | 1.95 V |
| Typical DC cold resistance | 15.68 Ω |
| Body | Glass tube, 1/4 x 1-1/4 in (6.4 x 31.7 mm) |
| AC interrupting rating | 35 A at 250 Vac; 10,000 A at 125 Vac |
| Element | single element |
| Rated current | 100 mA |
| Design standard | UL 248-14 |
| Typical melting I2t | 0.042 A²s |
| End caps | nickel-plated brass |
| Voltage rating | 250 Vac |
Design Notes
- Interrupting capability is 35 A at 250 Vac; 10,000 A at 125 Vac — confirm the circuit's prospective fault current stays below this.
- Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
- Do not upsize beyond 100 mA to stop nuisance trips — fix the cause instead.
Where It Is Used
Typical places this fuse turns up:
- EV
Common Questions
What are the ratings of the MDL-1/10-R?
100 mA continuous at 250 Vac, interrupting rating 35 A at 250 Vac; 10,000 A at 125 Vac.
Is the MDL-1/10-R fast-acting or time-delay?
It is slow-blow. It tolerates short inrush surges.
Can the MDL-1/10-R be used on a higher fault-current circuit?
No — its interrupting rating is 35 A at 250 Vac; 10,000 A at 125 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.
Shenzhen Gaorunxin Technology Co., Ltd
Online message
Shenzhen Gaorunxin Technology Co., Ltd
