Eaton MDQ-2/10 200 mA Two-Element Time-Delay 1/4 x 1-1/4 in Glass Fuse
Eaton MDQ-2/10 200 mA Two-Element Time-Delay 1/4 x 1-1/4 in Glass Fuse

Eaton MDQ-2/10 200 mA Two-Element Time-Delay 1/4 x 1-1/4 in Glass Fuse

Share
pEaton MDQ-2/10 — 200 mA, 250 V, time-delay glass cartridge fuse, 35 A at 250 Vac interrupting./p
    • Product Details
    • Download

    Eaton MDQ-2/10 200 mA Two-Element Time-Delay 1/4 x 1-1/4 in Glass Fuse

    Eaton MDQ-2/10 200 mA Two-Element Time-Delay 1/4 x 1-1/4 in Glass Fuse belongs to the Eaton range. It carries 200 mA, rated 250 Vac, uses a time-delay element, in a glass body.

    Technical Data

    ParameterRating
    Part numberMDQ-2/10
    Design standardUL 248-14
    Breaking capacity35 A at 250 Vac up to 1 A, 100 A to 7 A, 1,000 A at 32 V above
    Voltage rating250 Vac
    Typical DC cold resistance8.65 Ω
    End capsnickel-plated brass
    BodyGlass tube, 1/4 x 1-1/4 in (6.3 x 32 mm)
    Rated current200 mA
    AC interrupting rating35 A at 250 Vac
    Elementdual element

    Design Notes

    • Interrupting capability is 35 A at 250 Vac — confirm the circuit's prospective fault current stays below this.
    • Time-delay element rides through motor starting and capacitive inrush without nuisance opening.
    • Startup surges of several times rated current are tolerated for a short window.
    • Glass body lets you inspect the element after a fault.
    • Best kept for lower fault-current circuits where visual diagnosis matters.
    • Working voltage must stay at or below 250 Vac; a lower-rated part is not a safe substitute.
    • Do not upsize beyond 200 mA to stop nuisance trips — fix the cause instead.

    Where It Is Used

    Typical places this fuse turns up:

    • EV
    • surge

    Common Questions

    What are the ratings of the MDQ-2/10?

    200 mA continuous at 250 Vac, interrupting rating 35 A at 250 Vac.

    Is the MDQ-2/10 fast-acting or time-delay?

    It is time-delay. It tolerates short inrush surges.

    Can the MDQ-2/10 be used on a higher fault-current circuit?

    No — its interrupting rating is 35 A at 250 Vac. Choose a part whose breaking capacity exceeds the prospective fault current.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products