
| Parameter | Value |
|---|---|
| Orderable part number | MFBA2V1005P-301-R |
| Impedance @ 100 MHz | 300 Ohm |
| DCR maximum @ +25 °C | 150 mOhm |
| Rated current maximum | 1200 mA |
| Package | 1.0 x 0.5 mm |
| Size code | 1005 (0402) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +150 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1130 |

Drawing reproduced from Eaton Technical Data ELX1130: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
The number on the label is impedance at 100 MHz, in ohms. That single figure is what most designs are specified against, but the shape of the impedance curve around it is what actually decides whether the bead kills a 30 MHz switching harmonic or only the 300 MHz edge.
At 100 MHz this bead presents 300 ohm, and its DC resistance is 150 mOhm maximum. At the rated 1200 mA that resistance drops 0.18 V, which is the figure to check against the rail tolerance.
Within the MFBA2V1005P family this is value 2 of 4, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
Does the bead dissipate the noise as heat?
Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.
Does the bead dissipate the noise as heat?
Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.
Is impedance at 100 MHz the whole story?
No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd