
| Parameter | Value |
|---|---|
| Orderable part number | MFBA2V1608P-102-R |
| Impedance @ 100 MHz | 1000 Ohm |
| DCR maximum @ +25 °C | 150 mOhm |
| Rated current maximum | 1500 mA |
| Package | 1.6 x 0.8 mm |
| Size code | 1608 (0603) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +150 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1131 |

Drawing reproduced from Eaton Technical Data ELX1131: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
This is a multilayer chip bead: ferrite sheets printed with internal electrodes, fired into one body. The impedance comes from the magnetic material, not from a winding, so the part stays effective at frequencies where a wire-wound bead would have already turned capacitive.
At 100 MHz this bead presents 1000 ohm, and its DC resistance is 150 mOhm maximum. At the rated 1500 mA that resistance drops 0.225 V, which is the figure to check against the rail tolerance.
Within the MFBA2V1608P family this is value 6 of 6, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd