
| Parameter | Value |
|---|---|
| Orderable part number | MFBA3V1005K-301-R |
| Impedance @ 100 MHz | 300 Ohm |
| DCR maximum @ +25 °C | 500 mOhm |
| Rated current maximum | 100 mA |
| Package | 1.0 x 0.5 mm |
| Size code | 1005 (0402) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +150 °C |
| Qualification | AEC-Q200 |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data ELX1327 |

Drawing reproduced from Eaton Technical Data ELX1327: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
This is a multilayer chip bead: ferrite sheets printed with internal electrodes, fired into one body. The impedance comes from the magnetic material, not from a winding, so the part stays effective at frequencies where a wire-wound bead would have already turned capacitive.
At 100 MHz this bead presents 300 ohm, and its DC resistance is 500 mOhm maximum. At the rated 100 mA that resistance drops 0.05 V, which is the figure to check against the rail tolerance.
Within the MFBA3V1005K family this is value 5 of 7, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
Is impedance at 100 MHz the whole story?
No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.
Is impedance at 100 MHz the whole story?
No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd