Eaton MFBA3V2012H-202-R 2000 Ohm SMD Bead, 400 mA
Eaton MFBA3V2012H-202-R 2000 Ohm SMD Bead, 400 mA

Eaton MFBA3V2012H-202-R 2000 Ohm SMD Bead, 400 mA

Share
MFBA3V2012H-202-R: multilayer ferrite bead, 2000 Ohm at 100 MHz, 400 mA, DCR 600 mOhm.
    • Product Details
    • Download

    Eaton MFBA3V2012H-202-R 2000 Ohm SMD Bead, 400 mA

    MFBA3V2012H-202-R at a glance: multilayer ferrite bead, 2000 Ohm at 100 MHz, 400 mA, DCR 600 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMFBA3V2012H-202-R
    Impedance @ 100 MHz2000 Ohm
    DCR maximum @ +25 °C600 mOhm
    Rated current maximum400 mA
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-55 °C to +150 °C
    QualificationAEC-Q200
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data ELX1329

    Mechanical Dimensions & Pad Layout

    MFBA3V2012H-202-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data ELX1329: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    A ferrite bead is not an inductor in the usual sense: it is a lossy element. At low frequency it looks like a small resistance in series with the line; at the frequency where the ferrite absorbs, its impedance rises and the noise energy is converted into heat in the material rather than reflected back into the circuit.

    At 100 MHz this bead presents 2000 ohm, and its DC resistance is 600 mOhm maximum. At the rated 400 mA that resistance drops 0.24 V, which is the figure to check against the rail tolerance.

    Within the MFBA3V2012H family this is value 2 of 2, in a range that runs from 0 to 0 nH.

    Where This Series Fits

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: body electronics (keyless entry, ecu, antennas); advanced driver assistance systems (adas); infotainment and cluster electronics; safety electronics systems; wlan, wifi, bluetooth.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message