Eaton MFBM1V1005-050-R 5 Ohm Ferrite Bead, 1800 mA
Eaton MFBM1V1005-050-R 5 Ohm Ferrite Bead, 1800 mA

Eaton MFBM1V1005-050-R 5 Ohm Ferrite Bead, 1800 mA

Share
MFBM1V1005-050-R: multilayer ferrite bead, 5 Ohm at 100 MHz, 1800 mA, DCR 50 mOhm.
    • Product Details
    • Download

    Eaton MFBM1V1005-050-R 5 Ohm Ferrite Bead, 1800 mA

    MFBM1V1005-050-R at a glance: multilayer ferrite bead, 5 Ohm at 100 MHz, 1800 mA, DCR 50 mOhm.

    Specification Table

    ParameterValue
    Orderable part numberMFBM1V1005-050-R
    Impedance @ 100 MHz5 Ohm
    Impedance tolerance0~15 Ω
    DCR maximum @ +25 °C50 mOhm
    Rated current maximum1800 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package1.0 x 0.5 mm
    Size code1005 (0402)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11110

    Dimensions and Pad Layout

    MFBM1V1005-050-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11110: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a multilayer chip bead: ferrite sheets printed with internal electrodes, fired into one body. The impedance comes from the magnetic material, not from a winding, so the part stays effective at frequencies where a wire-wound bead would have already turned capacitive.

    At 100 MHz this bead presents 5 ohm with an allowed spread of 0~15 Ω, and its DC resistance is 50 mOhm maximum. At the rated 1800 mA that resistance drops 0.09 V, which is the figure to check against the rail tolerance.

    Within the MFBM1V1005 family this is value 2 of 21, in a range that runs from 0 to 0 nH.

    What This Family Is For

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antennas.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products