Eaton MFBM1V2012-070-R 7 Ohm Multilayer Chip Bead
Eaton MFBM1V2012-070-R 7 Ohm Multilayer Chip Bead

Eaton MFBM1V2012-070-R 7 Ohm Multilayer Chip Bead

Share
MFBM1V2012-070-R: multilayer ferrite bead, 7 Ohm at 100 MHz, 6000 mA, DCR 10 mOhm.
    • Product Details
    • Download

    Eaton MFBM1V2012-070-R 7 Ohm Multilayer Chip Bead

    MFBM1V2012-070-R at a glance: multilayer ferrite bead, 7 Ohm at 100 MHz, 6000 mA, DCR 10 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMFBM1V2012-070-R
    Impedance @ 100 MHz7 Ohm
    Impedance tolerance0~11 Ω
    DCR maximum @ +25 °C10 mOhm
    Rated current maximum6000 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package2.0 x 1.25 mm
    Size code2012 (0805)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11112

    Mechanical Drawing

    MFBM1V2012-070-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11112: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a multilayer chip bead: ferrite sheets printed with internal electrodes, fired into one body. The impedance comes from the magnetic material, not from a winding, so the part stays effective at frequencies where a wire-wound bead would have already turned capacitive.

    At 100 MHz this bead presents 7 ohm with an allowed spread of 0~11 Ω, and its DC resistance is 10 mOhm maximum. At the rated 6000 mA that resistance drops 0.06 V, which is the figure to check against the rail tolerance.

    Within the MFBM1V2012 family this is value 3 of 22, in a range that runs from 0 to 0 nH.

    Where This Series Fits

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antennas.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products