
| Parameter | Value |
|---|---|
| Orderable part number | MFBM1V3216-501-R |
| Impedance @ 100 MHz | 500 Ohm |
| Impedance tolerance | ±25% |
| DCR maximum @ +25 °C | 85 mOhm |
| Rated current maximum | 2500 mA |
| Test frequency | 100 MHz |
| Test voltage | 50 mV |
| Package | 3.2 x 1.6 mm |
| Size code | 3216 (1206) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 11113 |

Drawing reproduced from Eaton Technical Data 11113: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
A ferrite bead is not an inductor in the usual sense: it is a lossy element. At low frequency it looks like a small resistance in series with the line; at the frequency where the ferrite absorbs, its impedance rises and the noise energy is converted into heat in the material rather than reflected back into the circuit.
At 100 MHz this bead presents 500 ohm with an allowed spread of ±25%, and its DC resistance is 85 mOhm maximum. At the rated 2500 mA that resistance drops 0.213 V, which is the figure to check against the rail tolerance.
Within the MFBM1V3216 family this is value 22 of 25, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
Is impedance at 100 MHz the whole story?
No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.
What does the impedance tolerance mean?
It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.
How do I choose between MFBM and MFBW?
MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd