Eaton MFBW1V1608-102-R 1000 Ohm SMD Bead, 500 mA
Eaton MFBW1V1608-102-R 1000 Ohm SMD Bead, 500 mA

Eaton MFBW1V1608-102-R 1000 Ohm SMD Bead, 500 mA

Share
MFBW1V1608-102-R: multilayer ferrite bead, 1000 Ohm at 100 MHz, 500 mA, DCR 550 mOhm.
    • Product Details
    • Download

    Eaton MFBW1V1608-102-R 1000 Ohm SMD Bead, 500 mA

    MFBW1V1608-102-R at a glance: multilayer ferrite bead, 1000 Ohm at 100 MHz, 500 mA, DCR 550 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMFBW1V1608-102-R
    Impedance @ 100 MHz1000 Ohm
    Impedance tolerance±25%
    DCR maximum @ +25 °C550 mOhm
    Rated current maximum500 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11107

    Outline Drawing

    MFBW1V1608-102-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11107: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    What the Numbers Mean

    The number on the label is impedance at 100 MHz, in ohms. That single figure is what most designs are specified against, but the shape of the impedance curve around it is what actually decides whether the bead kills a 30 MHz switching harmonic or only the 300 MHz edge.

    At 100 MHz this bead presents 1000 ohm with an allowed spread of ±25%, and its DC resistance is 550 mOhm maximum. At the rated 500 mA that resistance drops 0.275 V, which is the figure to check against the rail tolerance.

    Within the MFBW1V1608 family this is value 24 of 28, in a range that runs from 0 to 0 nH.

    What This Family Is For

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    Does the bead dissipate the noise as heat?
    Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message