Eaton MFBW1V1608-301-R 300 Ohm SMD Bead, 1000 mA
Eaton MFBW1V1608-301-R 300 Ohm SMD Bead, 1000 mA

Eaton MFBW1V1608-301-R 300 Ohm SMD Bead, 1000 mA

Share
MFBW1V1608-301-R: multilayer ferrite bead, 300 Ohm at 100 MHz, 1000 mA, DCR 250 mOhm.
    • Product Details
    • Download

    Eaton MFBW1V1608-301-R 300 Ohm SMD Bead, 1000 mA

    MFBW1V1608-301-R at a glance: multilayer ferrite bead, 300 Ohm at 100 MHz, 1000 mA, DCR 250 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMFBW1V1608-301-R
    Impedance @ 100 MHz300 Ohm
    Impedance tolerance±25%
    DCR maximum @ +25 °C250 mOhm
    Rated current maximum1000 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package1.6 x 0.8 mm
    Size code1608 (0603)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11107

    Dimensions and Pad Layout

    MFBW1V1608-301-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11107: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    Beads are placed in series with a supply or signal line to take the high-frequency edge off it. The rated current and the DCR decide whether the part can sit in a power path; the impedance decides how much noise it removes.

    At 100 MHz this bead presents 300 ohm with an allowed spread of ±25%, and its DC resistance is 250 mOhm maximum. At the rated 1000 mA that resistance drops 0.25 V, which is the figure to check against the rail tolerance.

    Within the MFBW1V1608 family this is value 20 of 28, in a range that runs from 0 to 0 nH.

    What This Family Is For

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antenna.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    Does the bead dissipate the noise as heat?
    Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products