Eaton MFBW1V3216-150-R 15 Ohm Ferrite Bead, 3000 mA
Eaton MFBW1V3216-150-R 15 Ohm Ferrite Bead, 3000 mA

Eaton MFBW1V3216-150-R 15 Ohm Ferrite Bead, 3000 mA

Share
MFBW1V3216-150-R: multilayer ferrite bead, 15 Ohm at 100 MHz, 3000 mA, DCR 50 mOhm.
    • Product Details
    • Download

    Eaton MFBW1V3216-150-R 15 Ohm Ferrite Bead, 3000 mA

    MFBW1V3216-150-R at a glance: multilayer ferrite bead, 15 Ohm at 100 MHz, 3000 mA, DCR 50 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMFBW1V3216-150-R
    Impedance @ 100 MHz15 Ohm
    Impedance tolerance9~21 Ω
    DCR maximum @ +25 °C50 mOhm
    Rated current maximum3000 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package3.2 x 1.6 mm
    Size code3216 (1206)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11109

    Mechanical Drawing

    MFBW1V3216-150-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11109: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    Beads are placed in series with a supply or signal line to take the high-frequency edge off it. The rated current and the DCR decide whether the part can sit in a power path; the impedance decides how much noise it removes.

    At 100 MHz this bead presents 15 ohm with an allowed spread of 9~21 Ω, and its DC resistance is 50 mOhm maximum. At the rated 3000 mA that resistance drops 0.15 V, which is the figure to check against the rail tolerance.

    Within the MFBW1V3216 family this is value 6 of 29, in a range that runs from 0 to 0 nH.

    Where This Series Fits

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antennas.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message