Eaton MFBW1V3216-151-R 150 Ohm Ferrite Bead, 2500 mA
Eaton MFBW1V3216-151-R 150 Ohm Ferrite Bead, 2500 mA

Eaton MFBW1V3216-151-R 150 Ohm Ferrite Bead, 2500 mA

Share
MFBW1V3216-151-R: multilayer ferrite bead, 150 Ohm at 100 MHz, 2500 mA, DCR 120 mOhm.
    • Product Details
    • Download

    Eaton MFBW1V3216-151-R 150 Ohm Ferrite Bead, 2500 mA

    MFBW1V3216-151-R at a glance: multilayer ferrite bead, 150 Ohm at 100 MHz, 2500 mA, DCR 120 mOhm.

    Key Specifications

    ParameterValue
    Orderable part numberMFBW1V3216-151-R
    Impedance @ 100 MHz150 Ohm
    Impedance tolerance±25%
    DCR maximum @ +25 °C120 mOhm
    Rated current maximum2500 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package3.2 x 1.6 mm
    Size code3216 (1206)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11109

    Dimensions and Pad Layout

    MFBW1V3216-151-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11109: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    The Figures Explained

    This is a multilayer chip bead: ferrite sheets printed with internal electrodes, fired into one body. The impedance comes from the magnetic material, not from a winding, so the part stays effective at frequencies where a wire-wound bead would have already turned capacitive.

    At 100 MHz this bead presents 150 ohm with an allowed spread of ±25%, and its DC resistance is 120 mOhm maximum. At the rated 2500 mA that resistance drops 0.3 V, which is the figure to check against the rail tolerance.

    Within the MFBW1V3216 family this is value 18 of 29, in a range that runs from 0 to 0 nH.

    What This Family Is For

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antennas.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    Is impedance at 100 MHz the whole story?
    No. It is the specified reference point, but the impedance curve falls away on both sides. A bead chosen for a 100 MHz figure may be weak at the 30 MHz harmonic that is actually failing EMC.

    What does the impedance tolerance mean?
    It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products