Eaton MFBW1V3216-182-R 1800 Ohm Ferrite Bead 1206
Eaton MFBW1V3216-182-R 1800 Ohm Ferrite Bead 1206

Eaton MFBW1V3216-182-R 1800 Ohm Ferrite Bead 1206

Share
MFBW1V3216-182-R: multilayer ferrite bead, 1800 Ohm at 100 MHz, 500 mA, DCR 600 mOhm.
    • Product Details
    • Download

    Eaton MFBW1V3216-182-R 1800 Ohm Ferrite Bead 1206

    MFBW1V3216-182-R at a glance: multilayer ferrite bead, 1800 Ohm at 100 MHz, 500 mA, DCR 600 mOhm.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMFBW1V3216-182-R
    Impedance @ 100 MHz1800 Ohm
    Impedance tolerance±25%
    DCR maximum @ +25 °C600 mOhm
    Rated current maximum500 mA
    Test frequency100 MHz
    Test voltage50 mV
    Package3.2 x 1.6 mm
    Size code3216 (1206)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 11109

    Outline Drawing

    MFBW1V3216-182-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 11109: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.

    How to Read These Ratings

    A ferrite bead is not an inductor in the usual sense: it is a lossy element. At low frequency it looks like a small resistance in series with the line; at the frequency where the ferrite absorbs, its impedance rises and the noise energy is converted into heat in the material rather than reflected back into the circuit.

    At 100 MHz this bead presents 1800 ohm with an allowed spread of ±25%, and its DC resistance is 600 mOhm maximum. At the rated 500 mA that resistance drops 0.3 V, which is the figure to check against the rail tolerance.

    Within the MFBW1V3216 family this is value 28 of 29, in a range that runs from 0 to 0 nH.

    Positioning in the Range

    The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.

    • A bead in a power path drops DC volts according to its DCR. Check that drop against the rail tolerance before choosing a high-impedance part.
    • Typical applications: industrial connectivity (iot); wireless communications; bluetooth; wifi; antennas.
    • Design note: pick the bead from the impedance curve at the failing frequency, then check the DC current and DCR for the line it sits in.

    Frequently Asked Questions

    How do I choose between MFBM and MFBW?
    MFBM is the high-current series: lower impedance per size, higher rated current. MFBW is the high-impedance series for signal lines where DC current is small.

    Does the bead dissipate the noise as heat?
    Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.

    Does the bead dissipate the noise as heat?
    Yes. The ferrite is lossy at the frequencies it absorbs, so the noise energy becomes heat in the material rather than being reflected back to the source.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products