
| Parameter | Value |
|---|---|
| Orderable part number | MFBW1V3216-801-R |
| Impedance @ 100 MHz | 800 Ohm |
| Impedance tolerance | ±25% |
| DCR maximum @ +25 °C | 250 mOhm |
| Rated current maximum | 2000 mA |
| Test frequency | 100 MHz |
| Test voltage | 50 mV |
| Package | 3.2 x 1.6 mm |
| Size code | 3216 (1206) |
| Mounting | Surface mount |
| Operating temperature | -55 °C to +125 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, -R suffix |
| Data sheet | Eaton Technical Data 11109 |

Drawing reproduced from Eaton Technical Data 11109: outline with rated mm dimensions, pad layout and marking. Tolerances are stated on the drawing.
The number on the label is impedance at 100 MHz, in ohms. That single figure is what most designs are specified against, but the shape of the impedance curve around it is what actually decides whether the bead kills a 30 MHz switching harmonic or only the 300 MHz edge.
At 100 MHz this bead presents 800 ohm with an allowed spread of ±25%, and its DC resistance is 250 mOhm maximum. At the rated 2000 mA that resistance drops 0.5 V, which is the figure to check against the rail tolerance.
Within the MFBW1V3216 family this is value 24 of 29, in a range that runs from 0 to 0 nH.
The ferrite bead family spans a few ohms to several hundred ohms at 100 MHz, in 0201 through 1206 bodies. Current ratings run from a few hundred milliamps in the small sizes to several amps in the larger ones.
What does the impedance tolerance mean?
It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.
What does the impedance tolerance mean?
It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.
What does the impedance tolerance mean?
It is the allowed spread around the nominal impedance. Low-value beads are specified as a range, for example 0 to 15 ohm, because a percentage tolerance at those values would be meaningless.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd