Eaton MLVC32V150C550 150 V Multilayer Varistor
Eaton MLVC32V150C550 150 V Multilayer Varistor

Eaton MLVC32V150C550 150 V Multilayer Varistor

Share
MLVC32V150C550: multilayer varistor ESD suppressor, 180 V varistor voltage, 150 V working, 317 V clamp, 550 pF, 3.6 J.
    • Product Details
    • Download

    Eaton MLVC32V150C550 150 V Multilayer Varistor

    MLVC32V150C550 at a glance: multilayer varistor ESD suppressor, 180 V varistor voltage, 150 V working, 317 V clamp, 550 pF, 3.6 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMLVC32V150C550
    Working voltage, DC150 Vdc
    Working voltage, AC115 Vac
    Varistor voltage at 1 mA180 V ±10%
    Clamping voltage at 1 A317 V
    Energy absorption, 10/1000 us3.6 J
    Peak current, 8/20 us400 A
    Typical capacitance at 1 MHz550 pF
    Package3225 (8063 metric)
    MountingSurface mount
    Operating temperature-55 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data 11236

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    A chip varistor is a ceramic body with two metal terminations, so it looks like a capacitor and behaves like one until the transient arrives. That is why the capacitance column is quoted on every page: it is the parameter that decides whether the part can sit on a data line.

    The clamp column works out at 1.76 times the varistor voltage: 317 V at the rated current against 180 V at 1 mA. That ratio is what the downstream part has to survive, not the 180 V figure on the label.

    The 550 pF typical capacitance is the cost of the clamp. On a power rail it is irrelevant; on a data line it is the reason to look at the low-capacitance versions of the same voltage.

    Within the MLVC high energy family this is item 78 of 97 in the Eaton catalogue.

    Where This Series Fits

    The return path is half the component. A varistor tied to a ground plane far from the connector leaves the loop inductance in series with the clamp, and the residual voltage at the chip is the clamp plus L di/dt.

    • Do not run the part at its varistor voltage: the working voltage column is the continuous limit, and the varistor voltage is 1.5 to 2 times higher only because the ceramic is soft at the knee.
    • These parts are halogen free and RoHS compliant without exemptions, which matters for automotive and appliance programmes.

    Frequently Asked Questions

    Can it protect a differential pair?
    Only with a low-capacitance part and a layout that keeps both lines symmetric. A single varistor from each line to ground is normal; one across the pair is not, because it unbalances the pair.

    What happens if the part is run above its working voltage?
    Leakage rises steeply and the body heats. A varistor is not a clamp with a sharp knee, so continuous operation above the rating is a slow degradation, not an immediate failure.

    Does the package size change the electrical ratings?
    Yes, the energy and peak current scale with the body volume, so a 0402 and a 1206 of the same voltage are not interchangeable on a surge.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products