Eaton MOV20V230 Metal Oxide Varistor 360 V
Eaton MOV20V230 Metal Oxide Varistor 360 V

Eaton MOV20V230 Metal Oxide Varistor 360 V

Share
MOV20V230: radial leaded metal oxide varistor, 360 V varistor voltage, 300 V working, 595 V clamp, 1100 pF, 163 J.
    • Product Details
    • Download

    Eaton MOV20V230 Metal Oxide Varistor 360 V

    MOV20V230 at a glance: radial leaded metal oxide varistor, 360 V varistor voltage, 300 V working, 595 V clamp, 1100 pF, 163 J.

    Key Specifications

    ParameterValue
    Orderable part numberMOV20V230
    Varistor voltage at 1 mA360 V
    Maximum continuous AC voltage230 Vrms
    Maximum continuous DC voltage300 Vdc
    Clamping voltage595 V
    Clamping current100 A
    Maximum surge current, 8/20 us6500 A
    Rated power1 W
    Typical capacitance at 1 kHz1100 pF
    Maximum energy, 10/1000 us163 J
    Maximum body diameter5.5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package20 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1287

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    What the Numbers Mean

    The disc is a sintered zinc oxide body with a silver electrode on each face and two tinned leads. Energy absorption scales with the volume of the body, which is why a 20 mm part takes several times the joule rating of a 7 mm part at the same varistor voltage.

    The clamp column works out at 1.65 times the varistor voltage: 595 V at the rated current against 360 V at 1 mA. That ratio is what the downstream part has to survive, not the 360 V figure on the label.

    The disc absorbs 163 J in a 10/1000 us pulse and carries 6500 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 1 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 1100 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOV family this is item 58 of 71 in the Eaton catalogue.

    Positioning in the Range

    The varistor sits across the input after the fuse and before the rectifier, with short, thick traces or a direct lead-to-terminal connection. A long return path turns the trace inductance into a voltage spike that the varistor cannot clamp.

    • Do not put a varistor across a DC bus without checking the follow current: at DC there is no zero crossing to extinguish it, and the disc can overheat after the surge has passed.
    • The epoxy coating is the insulation, so the lead bend radius and the mounting clip both matter: a cracked coating at the lead exit is a failure point.

    Frequently Asked Questions

    What happens at end of life?
    A varistor that absorbs more than its rating drifts low in voltage and eventually fails short. That is why a fuse or a thermal element is placed in series with it on mains inputs.

    Can it be used on a DC bus?
    Yes, within the DC rating, but the energy per event is usually larger because there is no zero crossing to help extinguish the follow current. Check the application note before using a mains part on a high-voltage DC bus.

    How do I choose between 130 V and 150 V for a 120 V line?
    On a 120 V nominal line the steady-state RMS can reach 132 V or more, so a 130 Vac part has no headroom. The 150 V part is the usual choice, and the varistor voltage that comes with it is still below the withstand of most downstream parts.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products