Eaton MOV20V420 MOV Disc Varistor 20 mm
Eaton MOV20V420 MOV Disc Varistor 20 mm

Eaton MOV20V420 MOV Disc Varistor 20 mm

Share
MOV20V420: radial leaded metal oxide varistor, 680 V varistor voltage, 560 V working, 1120 V clamp, 600 pF, 230 J.
    • Product Details
    • Download

    Eaton MOV20V420 MOV Disc Varistor 20 mm

    MOV20V420 at a glance: radial leaded metal oxide varistor, 680 V varistor voltage, 560 V working, 1120 V clamp, 600 pF, 230 J.

    Specification Table

    ParameterValue
    Orderable part numberMOV20V420
    Varistor voltage at 1 mA680 V
    Maximum continuous AC voltage420 Vrms
    Maximum continuous DC voltage560 Vdc
    Clamping voltage1120 V
    Clamping current100 A
    Maximum surge current, 8/20 us6500 A
    Rated power1 W
    Typical capacitance at 1 kHz600 pF
    Maximum energy, 10/1000 us230 J
    Maximum body diameter7 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package20 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1287

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    The disc is coated in epoxy and marked with the part number and the varistor voltage. Because the body is the component, the lead spacing and the disc diameter together decide the footprint – there is no separate package to shrink around it.

    The clamp column works out at 1.65 times the varistor voltage: 1120 V at the rated current against 680 V at 1 mA. That ratio is what the downstream part has to survive, not the 680 V figure on the label.

    The disc absorbs 230 J in a 10/1000 us pulse and carries 6500 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 1 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 600 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOV family this is item 65 of 71 in the Eaton catalogue.

    Positioning in the Range

    Keep the leads short and do not sleeve them together: the loop area between the two leads is part of the clamping path, and folding them against each other is what keeps the inductance low.

    • Do not put a varistor across a DC bus without checking the follow current: at DC there is no zero crossing to extinguish it, and the disc can overheat after the surge has passed.
    • Disc diameter sets both the energy and the lead spacing. A 20 mm part needs a 7.5 mm hole pitch, so the footprint decision comes before the electrical one.

    Frequently Asked Questions

    Does the lead spacing matter electrically?
    It matters mechanically and for inductance. Wider spacing means a larger loop, which adds inductance in series with the clamp; the disc diameter sets the spacing, so the two choices are linked.

    What is the rated power for?
    It is the continuous dissipation the disc can take at 85 °C ambient. It matters when the varistor sits at a voltage close to its knee, not during the surge.

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products