Eaton MOVHE07V385 385 Vac Radial Varistor
Eaton MOVHE07V385 385 Vac Radial Varistor

Eaton MOVHE07V385 385 Vac Radial Varistor

Share
MOVHE07V385: radial leaded metal oxide varistor, 620 V varistor voltage, 505 V working, 1025 V clamp, 80 pF, 55 J.
    • Product Details
    • Download

    Eaton MOVHE07V385 385 Vac Radial Varistor

    MOVHE07V385 at a glance: radial leaded metal oxide varistor, 620 V varistor voltage, 505 V working, 1025 V clamp, 80 pF, 55 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOVHE07V385
    Varistor voltage at 1 mA620 V
    Maximum continuous AC voltage385 Vrms
    Maximum continuous DC voltage505 Vdc
    Clamping voltage1025 V
    Clamping current10 A
    Maximum surge current, 8/20 us1750 A
    Rated power0.25 W
    Typical capacitance at 1 kHz80 pF
    Maximum energy, 10/1000 us55 J
    Maximum body diameter6 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package7 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    How to Read These Ratings

    The disc is a sintered zinc oxide body with a silver electrode on each face and two tinned leads. Energy absorption scales with the volume of the body, which is why a 20 mm part takes several times the joule rating of a 7 mm part at the same varistor voltage.

    The clamp column works out at 1.65 times the varistor voltage: 1025 V at the rated current against 620 V at 1 mA. That ratio is what the downstream part has to survive, not the 620 V figure on the label.

    The disc absorbs 55 J in a 10/1000 us pulse and carries 1750 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.25 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 80 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 13 of 71 in the Eaton catalogue.

    Positioning in the Range

    The varistor sits across the input after the fuse and before the rectifier, with short, thick traces or a direct lead-to-terminal connection. A long return path turns the trace inductance into a voltage spike that the varistor cannot clamp.

    • The clamping voltage is quoted at a test current that is far below the surge. At the full 8/20 rating the residual voltage is higher – read the V-I curve.
    • The marking on the body gives the part number and the varistor voltage. In a service situation that marking is how the failed part gets identified.

    Frequently Asked Questions

    What happens at end of life?
    A varistor that absorbs more than its rating drifts low in voltage and eventually fails short. That is why a fuse or a thermal element is placed in series with it on mains inputs.

    Can it be used on a DC bus?
    Yes, within the DC rating, but the energy per event is usually larger because there is no zero crossing to help extinguish the follow current. Check the application note before using a mains part on a high-voltage DC bus.

    How do I choose between 130 V and 150 V for a 120 V line?
    On a 120 V nominal line the steady-state RMS can reach 132 V or more, so a 130 Vac part has no headroom. The 150 V part is the usual choice, and the varistor voltage that comes with it is still below the withstand of most downstream parts.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products