Eaton MOVHE10V320 MOV Disc Varistor 10 mm
Eaton MOVHE10V320 MOV Disc Varistor 10 mm

Eaton MOVHE10V320 MOV Disc Varistor 10 mm

Share
MOVHE10V320: radial leaded metal oxide varistor, 510 V varistor voltage, 415 V working, 845 V clamp, 200 pF, 90 J.
    • Product Details
    • Download

    Eaton MOVHE10V320 MOV Disc Varistor 10 mm

    MOVHE10V320 at a glance: radial leaded metal oxide varistor, 510 V varistor voltage, 415 V working, 845 V clamp, 200 pF, 90 J.

    Specification Table

    ParameterValue
    Orderable part numberMOVHE10V320
    Varistor voltage at 1 mA510 V
    Maximum continuous AC voltage320 Vrms
    Maximum continuous DC voltage415 Vdc
    Clamping voltage845 V
    Clamping current25 A
    Maximum surge current, 8/20 us3500 A
    Rated power0.4 W
    Typical capacitance at 1 kHz200 pF
    Maximum energy, 10/1000 us90 J
    Maximum body diameter6 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package10 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    The disc is a sintered zinc oxide body with a silver electrode on each face and two tinned leads. Energy absorption scales with the volume of the body, which is why a 20 mm part takes several times the joule rating of a 7 mm part at the same varistor voltage.

    The clamp column works out at 1.66 times the varistor voltage: 845 V at the rated current against 510 V at 1 mA. That ratio is what the downstream part has to survive, not the 510 V figure on the label.

    The disc absorbs 90 J in a 10/1000 us pulse and carries 3500 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.4 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 200 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 26 of 71 in the Eaton catalogue.

    Positioning in the Range

    Mount it with the body clear of the transformer and the bridge rectifier; a disc running at its rated power needs air, and the derating curve assumes it gets some.

    • Do not put a varistor across a DC bus without checking the follow current: at DC there is no zero crossing to extinguish it, and the disc can overheat after the surge has passed.
    • The marking on the body gives the part number and the varistor voltage. In a service situation that marking is how the failed part gets identified.

    Frequently Asked Questions

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Why is the DC rating higher than the AC rating?
    The AC rating is an RMS value, so the peak of the sine is 1.41 times higher. The DC rating is set at that peak plus margin, which is why a 130 Vac part is rated 170 Vdc.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products