Eaton MOVHE14V150 Radial MOV, 6000 A Surge
Eaton MOVHE14V150 Radial MOV, 6000 A Surge

Eaton MOVHE14V150 Radial MOV, 6000 A Surge

Share
MOVHE14V150: radial leaded metal oxide varistor, 240 V varistor voltage, 200 V working, 395 V clamp, 830 pF, 84 J.
    • Product Details
    • Download

    Eaton MOVHE14V150 Radial MOV, 6000 A Surge

    MOVHE14V150 at a glance: radial leaded metal oxide varistor, 240 V varistor voltage, 200 V working, 395 V clamp, 830 pF, 84 J.

    Key Specifications

    ParameterValue
    Orderable part numberMOVHE14V150
    Varistor voltage at 1 mA240 V
    Maximum continuous AC voltage150 Vrms
    Maximum continuous DC voltage200 Vdc
    Clamping voltage395 V
    Clamping current50 A
    Maximum surge current, 8/20 us6000 A
    Rated power0.6 W
    Typical capacitance at 1 kHz830 pF
    Maximum energy, 10/1000 us84 J
    Maximum body diameter4.5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package14 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    How to Read These Ratings

    The disc is a sintered zinc oxide body with a silver electrode on each face and two tinned leads. Energy absorption scales with the volume of the body, which is why a 20 mm part takes several times the joule rating of a 7 mm part at the same varistor voltage.

    The clamp column works out at 1.65 times the varistor voltage: 395 V at the rated current against 240 V at 1 mA. That ratio is what the downstream part has to survive, not the 240 V figure on the label.

    The disc absorbs 84 J in a 10/1000 us pulse and carries 6000 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 0.6 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 830 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 36 of 71 in the Eaton catalogue.

    Series Positioning

    The varistor sits across the input after the fuse and before the rectifier, with short, thick traces or a direct lead-to-terminal connection. A long return path turns the trace inductance into a voltage spike that the varistor cannot clamp.

    • The energy rating is for a single 10/1000 microsecond pulse. Repeated surges add up, and a part that absorbs its full rating once will not do it twice without a voltage shift.
    • The epoxy coating is the insulation, so the lead bend radius and the mounting clip both matter: a cracked coating at the lead exit is a failure point.

    Frequently Asked Questions

    What happens at end of life?
    A varistor that absorbs more than its rating drifts low in voltage and eventually fails short. That is why a fuse or a thermal element is placed in series with it on mains inputs.

    Can it be used on a DC bus?
    Yes, within the DC rating, but the energy per event is usually larger because there is no zero crossing to help extinguish the follow current. Check the application note before using a mains part on a high-voltage DC bus.

    How do I choose between 130 V and 150 V for a 120 V line?
    On a 120 V nominal line the steady-state RMS can reach 132 V or more, so a 130 Vac part has no headroom. The 150 V part is the usual choice, and the varistor voltage that comes with it is still below the withstand of most downstream parts.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products