Eaton MOVHE20V130 Radial MOV, 10000 A Surge
Eaton MOVHE20V130 Radial MOV, 10000 A Surge

Eaton MOVHE20V130 Radial MOV, 10000 A Surge

Share
MOVHE20V130: radial leaded metal oxide varistor, 200 V varistor voltage, 170 V working, 340 V clamp, 2000 pF, 140 J.
    • Product Details
    • Download

    Eaton MOVHE20V130 Radial MOV, 10000 A Surge

    MOVHE20V130 at a glance: radial leaded metal oxide varistor, 200 V varistor voltage, 170 V working, 340 V clamp, 2000 pF, 140 J.

    Specification Table

    ParameterValue
    Orderable part numberMOVHE20V130
    Varistor voltage at 1 mA200 V
    Maximum continuous AC voltage130 Vrms
    Maximum continuous DC voltage170 Vdc
    Clamping voltage340 V
    Clamping current100 A
    Maximum surge current, 8/20 us10000 A
    Rated power1 W
    Typical capacitance at 1 kHz2000 pF
    Maximum energy, 10/1000 us140 J
    Maximum body diameter5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package20 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    The disc is coated in epoxy and marked with the part number and the varistor voltage. Because the body is the component, the lead spacing and the disc diameter together decide the footprint – there is no separate package to shrink around it.

    The clamp column works out at 1.7 times the varistor voltage: 340 V at the rated current against 200 V at 1 mA. That ratio is what the downstream part has to survive, not the 200 V figure on the label.

    The disc absorbs 140 J in a 10/1000 us pulse and carries 10000 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 1 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 2000 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 52 of 71 in the Eaton catalogue.

    Series Positioning

    Keep the leads short and do not sleeve them together: the loop area between the two leads is part of the clamping path, and folding them against each other is what keeps the inductance low.

    • A varistor that has failed short looks like a low-value resistor across the line. Always pair a mains varistor with a fuse or a thermal element.
    • The epoxy coating is the insulation, so the lead bend radius and the mounting clip both matter: a cracked coating at the lead exit is a failure point.

    Frequently Asked Questions

    Does the lead spacing matter electrically?
    It matters mechanically and for inductance. Wider spacing means a larger loop, which adds inductance in series with the clamp; the disc diameter sets the spacing, so the two choices are linked.

    What is the rated power for?
    It is the continuous dissipation the disc can take at 85 °C ambient. It matters when the varistor sits at a voltage close to its knee, not during the surge.

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products