Eaton MOVHE20V320 MOV Disc Varistor 20 mm
Eaton MOVHE20V320 MOV Disc Varistor 20 mm

Eaton MOVHE20V320 MOV Disc Varistor 20 mm

Share
MOVHE20V320: radial leaded metal oxide varistor, 510 V varistor voltage, 415 V working, 845 V clamp, 780 pF, 360 J.
    • Product Details
    • Download

    Eaton MOVHE20V320 MOV Disc Varistor 20 mm

    MOVHE20V320 at a glance: radial leaded metal oxide varistor, 510 V varistor voltage, 415 V working, 845 V clamp, 780 pF, 360 J.

    Specification Table

    ParameterValue
    Orderable part numberMOVHE20V320
    Varistor voltage at 1 mA510 V
    Maximum continuous AC voltage320 Vrms
    Maximum continuous DC voltage415 Vdc
    Clamping voltage845 V
    Clamping current100 A
    Maximum surge current, 8/20 us10000 A
    Rated power1 W
    Typical capacitance at 1 kHz780 pF
    Maximum energy, 10/1000 us360 J
    Maximum body diameter6 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package20 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    Reading the Data Sheet

    The disc is a sintered zinc oxide body with a silver electrode on each face and two tinned leads. Energy absorption scales with the volume of the body, which is why a 20 mm part takes several times the joule rating of a 7 mm part at the same varistor voltage.

    The clamp column works out at 1.66 times the varistor voltage: 845 V at the rated current against 510 V at 1 mA. That ratio is what the downstream part has to survive, not the 510 V figure on the label.

    The disc absorbs 360 J in a 10/1000 us pulse and carries 10000 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 1 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 780 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 62 of 71 in the Eaton catalogue.

    Series Positioning

    Mount it with the body clear of the transformer and the bridge rectifier; a disc running at its rated power needs air, and the derating curve assumes it gets some.

    • A varistor that has failed short looks like a low-value resistor across the line. Always pair a mains varistor with a fuse or a thermal element.
    • Disc diameter sets both the energy and the lead spacing. A 20 mm part needs a 7.5 mm hole pitch, so the footprint decision comes before the electrical one.

    Frequently Asked Questions

    Are these parts UL recognised?
    Yes, the data sheet lists cURus to UL 1449 and TUV. The file numbers are on the agency page of the data sheet, and they cover the whole family.

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Why is the DC rating higher than the AC rating?
    The AC rating is an RMS value, so the peak of the sine is 1.41 times higher. The DC rating is set at that peak plus margin, which is why a 130 Vac part is rated 170 Vdc.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products