Eaton MOVHE20V485 Metal Oxide Varistor 780 V
Eaton MOVHE20V485 Metal Oxide Varistor 780 V

Eaton MOVHE20V485 Metal Oxide Varistor 780 V

Share
MOVHE20V485: radial leaded metal oxide varistor, 780 V varistor voltage, 640 V working, 1290 V clamp, 510 pF, 440 J.
    • Product Details
    • Download

    Eaton MOVHE20V485 Metal Oxide Varistor 780 V

    MOVHE20V485 at a glance: radial leaded metal oxide varistor, 780 V varistor voltage, 640 V working, 1290 V clamp, 510 pF, 440 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOVHE20V485
    Varistor voltage at 1 mA780 V
    Maximum continuous AC voltage485 Vrms
    Maximum continuous DC voltage640 Vdc
    Clamping voltage1290 V
    Clamping current100 A
    Maximum surge current, 8/20 us10000 A
    Rated power1 W
    Typical capacitance at 1 kHz510 pF
    Maximum energy, 10/1000 us440 J
    Maximum body diameter7.5 mm
    Agency recognitioncURus (UL 1449) and TUV
    Package20 mm disc
    MountingRadial, through-hole
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1288

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    What the Numbers Mean

    A radial disc varistor is the mains-side workhorse: it absorbs the surge that comes down the line and clamps it below the withstand of what follows. The selection is a chain of three numbers – continuous voltage, varistor voltage and energy – and the disc diameter sets all three.

    The clamp column works out at 1.65 times the varistor voltage: 1290 V at the rated current against 780 V at 1 mA. That ratio is what the downstream part has to survive, not the 780 V figure on the label.

    The disc absorbs 440 J in a 10/1000 us pulse and carries 10000 A in an 8/20 us pulse. Those are single shot figures: the same part will take a fraction of the energy repeatedly.

    At 1 W continuous rating the body can sit at the working voltage indefinitely. A 20 mm disc handles roughly 510 pF across the line, which matters on a signal-carrying pair but not on a mains input.

    Within the MOVHE family this is item 67 of 71 in the Eaton catalogue.

    What This Family Is For

    The varistor sits across the input after the fuse and before the rectifier, with short, thick traces or a direct lead-to-terminal connection. A long return path turns the trace inductance into a voltage spike that the varistor cannot clamp.

    • Do not put a varistor across a DC bus without checking the follow current: at DC there is no zero crossing to extinguish it, and the disc can overheat after the surge has passed.
    • The derating curve starts at 85 °C for most discs: above that the rated power falls linearly to zero at the maximum temperature.

    Frequently Asked Questions

    How do I size the disc diameter?
    From the energy, not the current. Estimate the joule content of the surge your source can deliver, add margin for repeated events, and pick the smallest disc that covers it; a larger disc also raises the capacitance across the line.

    Why is the DC rating higher than the AC rating?
    The AC rating is an RMS value, so the peak of the sine is 1.41 times higher. The DC rating is set at that peak plus margin, which is why a 130 Vac part is rated 170 Vdc.

    What happens at end of life?
    A varistor that absorbs more than its rating drifts low in voltage and eventually fails short. That is why a fuse or a thermal element is placed in series with it on mains inputs.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products