
| Parameter | Value |
|---|---|
| Orderable part number | MOVS2825V017 |
| Working voltage, RMS | 17 Vrms |
| Working voltage, DC | 22 Vdc |
| Varistor voltage at 1 mA | 24.3-29.7 V |
| Leakage current at 0.8 Vv | max. 50 uA |
| Clamping voltage, 8/20 us | 60 V |
| Peak current, 8/20 us | 150 A |
| Maximum energy, 10/1000 us | 0.6 J |
| Rated power | 0.01 W |
| Typical capacitance at 1 kHz | 1400 pF |
| Component thickness | 3.2 mm |
| Package | 2825 |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +85 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, halogen free |
| Data sheet | Eaton Technical Data ELX1005 |
Dimensions, recommended pad or hole pattern and the derating curves are
on the data sheet pages; the package line above gives the body size as Eaton states it.
Selection follows the same chain as a radial part: continuous voltage first, then varistor voltage, then the energy the transient actually delivers. The clamp column tells you what the downstream circuit sees at the rated current.
The clamp column works out at 2.47 times the varistor voltage: 60 V at the rated current against 24.3~29.7 V at 1 mA. That ratio is what the downstream part has to survive, not the 24.3~29.7 V figure on the label.
Standing at 22 V the leakage is at most 50 uA, which is 1.1 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.
At 3.2 mm tall this is the part that has to fit under the enclosure. The 0.6 J rating and the 150 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.
Within the MOVS2825 family this is item 3 of 27 in the Eaton catalogue.
Place the chip directly across the connector pins with the ground return on the same layer. The part protects what is between its own terminals, so a shared ground path back to the connector defeats it.
What is the operating temperature range?
The table states it for each family; the upper limit is the point where the rated power falls to zero, not the point where the part stops working.
Is the part halogen free?
Yes, the data sheet states halogen free and RoHS compliance without exemptions for the whole family.
Is the SMD part a drop-in for a radial disc?
Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd