Eaton MOVS2825V130 SMD Varistor 130 Vac
Eaton MOVS2825V130 SMD Varistor 130 Vac

Eaton MOVS2825V130 SMD Varistor 130 Vac

Share
MOVS2825V130: surface mount metal oxide varistor, 185-225 V varistor voltage, 175 V working, 355 V clamp, 90 pF, 6.5 J.
    • Product Details
    • Download

    Eaton MOVS2825V130 SMD Varistor 130 Vac

    MOVS2825V130 at a glance: surface mount metal oxide varistor, 185-225 V varistor voltage, 175 V working, 355 V clamp, 90 pF, 6.5 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMOVS2825V130
    Working voltage, RMS130 Vrms
    Working voltage, DC175 Vdc
    Varistor voltage at 1 mA185-225 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us355 V
    Peak current, 8/20 us400 A
    Maximum energy, 10/1000 us6.5 J
    Rated power0.1 W
    Typical capacitance at 1 kHz90 pF
    Component thickness4.2 mm
    Package2825
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1005

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    How to Read These Ratings

    The thickness column is the one that gets overlooked. A 4032 varistor is a 3.2 mm to 5.6 mm tall block, and that height has to clear the enclosure or the board-to-board gap before the part is designed in.

    The clamp column works out at 1.92 times the varistor voltage: 355 V at the rated current against 185~225 V at 1 mA. That ratio is what the downstream part has to survive, not the 185~225 V figure on the label.

    Standing at 175 V the leakage is at most 50 uA, which is 8.75 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 6.5 J rating and the 400 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS2825 family this is item 14 of 27 in the Eaton catalogue.

    Series Positioning

    The pad is the heatsink. Use the recommended land pattern even when the board is tight; a reduced pad raises the body temperature at the same continuous current.

    • Reflow once. A second pass reflows the termination and can crack the ceramic at the silver-nickel barrier.
    • The termination is silver-nickel, so the parts are compatible with lead-free and tin-lead processes, but not with a second reflow at the same profile.

    Frequently Asked Questions

    How much height does it add?
    The thickness column is the body height above the board, 3.2 mm for the low profile parts and up to 5.6 mm for the high voltage ones. That has to clear the enclosure before the part is designed in.

    Can it be reflow soldered?
    Yes, that is the point of the package. The recommended profile and pad geometry are in the data sheet, and the pad is also the thermal path, so a reduced pad raises the body temperature.

    What is the peak current rating for?
    It is the 8/20 microsecond single-shot current the body survives. The energy column is the better guide for a long pulse, because a 10/1000 microsecond waveform delivers far more joules at the same peak.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message