Eaton MOVS2825V230 SMD Metal Oxide Varistor 620 V
Eaton MOVS2825V230 SMD Metal Oxide Varistor 620 V

Eaton MOVS2825V230 SMD Metal Oxide Varistor 620 V

Share
MOVS2825V230: surface mount metal oxide varistor, 324-396 V varistor voltage, 300 V working, 620 V clamp, 60 pF, 10 J.
    • Product Details
    • Download

    Eaton MOVS2825V230 SMD Metal Oxide Varistor 620 V

    MOVS2825V230 at a glance: surface mount metal oxide varistor, 324-396 V varistor voltage, 300 V working, 620 V clamp, 60 pF, 10 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMOVS2825V230
    Working voltage, RMS230 Vrms
    Working voltage, DC300 Vdc
    Varistor voltage at 1 mA324-396 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us620 V
    Peak current, 8/20 us400 A
    Maximum energy, 10/1000 us10 J
    Rated power0.1 W
    Typical capacitance at 1 kHz60 pF
    Component thickness4.2 mm
    Package2825
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1005

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    A surface mount varistor puts the same zinc oxide body into a leadless chip so the protection sits next to the connector on an automated line. The absence of leads removes the inductance that slows a radial part, which matters when the transient has a fast edge.

    The clamp column works out at 1.91 times the varistor voltage: 620 V at the rated current against 324~396 V at 1 mA. That ratio is what the downstream part has to survive, not the 324~396 V figure on the label.

    Standing at 300 V the leakage is at most 50 uA, which is 15 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 10 J rating and the 400 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS2825 family this is item 20 of 27 in the Eaton catalogue.

    What This Family Is For

    Put it before the series ferrite or inductor, on the side that faces the cable. The order of the two components decides which one takes the surge.

    • Do not stack a chip varistor on a via-in-pad without filling it: the solder wicking changes the joint and the thermal path at the same time.
    • Reflow profile and pad geometry are in the data sheet; the part is not sensitive to moisture at the levels of a plastic package, but the solder joint is the thermal path.

    Frequently Asked Questions

    Can two parts be paralleled for more energy?
    Only if they are matched, which they are not. The varistor voltage tolerance means one part takes most of the current, so the pair behaves like the weaker one plus a little.

    What is the operating temperature range?
    The table states it for each family; the upper limit is the point where the rated power falls to zero, not the point where the part stops working.

    Is the part halogen free?
    Yes, the data sheet states halogen free and RoHS compliance without exemptions for the whole family.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products