Eaton MOVS2825V320 SMD Metal Oxide Varistor 845 V
Eaton MOVS2825V320 SMD Metal Oxide Varistor 845 V

Eaton MOVS2825V320 SMD Metal Oxide Varistor 845 V

Share
MOVS2825V320: surface mount metal oxide varistor, 459-561 V varistor voltage, 420 V working, 845 V clamp, 45 pF, 16 J.
    • Product Details
    • Download

    Eaton MOVS2825V320 SMD Metal Oxide Varistor 845 V

    MOVS2825V320 at a glance: surface mount metal oxide varistor, 459-561 V varistor voltage, 420 V working, 845 V clamp, 45 pF, 16 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMOVS2825V320
    Working voltage, RMS320 Vrms
    Working voltage, DC420 Vdc
    Varistor voltage at 1 mA459-561 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us845 V
    Peak current, 8/20 us400 A
    Maximum energy, 10/1000 us16 J
    Rated power0.1 W
    Typical capacitance at 1 kHz45 pF
    Component thickness5.6 mm
    Package2825
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1005

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    The Figures Explained

    The chip is terminated with a silver-plated nickel barrier, so the solder joint is also the thermal path into the board. A generous pad is not cosmetic: it is what keeps the body temperature down at the continuous rating.

    The clamp column works out at 1.84 times the varistor voltage: 845 V at the rated current against 459~561 V at 1 mA. That ratio is what the downstream part has to survive, not the 459~561 V figure on the label.

    Standing at 420 V the leakage is at most 50 uA, which is 21 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 5.6 mm tall this is the part that has to fit under the enclosure. The 16 J rating and the 400 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS2825 family this is item 24 of 27 in the Eaton catalogue.

    Series Positioning

    The pad is the heatsink. Use the recommended land pattern even when the board is tight; a reduced pad raises the body temperature at the same continuous current.

    • Reflow once. A second pass reflows the termination and can crack the ceramic at the silver-nickel barrier.
    • The 2825 and 4032 bodies are thick enough that the pick-and-place nozzle needs the right tip; a standard 0402 nozzle will not hold them.

    Frequently Asked Questions

    Can two parts be paralleled for more energy?
    Only if they are matched, which they are not. The varistor voltage tolerance means one part takes most of the current, so the pair behaves like the weaker one plus a little.

    What is the operating temperature range?
    The table states it for each family; the upper limit is the point where the rated power falls to zero, not the point where the part stops working.

    Is the part halogen free?
    Yes, the data sheet states halogen free and RoHS compliance without exemptions for the whole family.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products