Eaton MOVS4032V017 SMD Varistor 17 Vac
Eaton MOVS4032V017 SMD Varistor 17 Vac

Eaton MOVS4032V017 SMD Varistor 17 Vac

Share
MOVS4032V017: surface mount metal oxide varistor, 24.3-29.7 V varistor voltage, 22 V working, 60 V clamp, 2350 pF, 1.4 J.
    • Product Details
    • Download

    Eaton MOVS4032V017 SMD Varistor 17 Vac

    MOVS4032V017 at a glance: surface mount metal oxide varistor, 24.3-29.7 V varistor voltage, 22 V working, 60 V clamp, 2350 pF, 1.4 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMOVS4032V017
    Working voltage, RMS17 Vrms
    Working voltage, DC22 Vdc
    Varistor voltage at 1 mA24.3-29.7 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us60 V at 2.5 A
    Peak current, 8/20 us250 A
    Maximum energy, 10/1000 us1.4 J
    Rated power0.02 W
    Typical capacitance at 1 kHz2350 pF
    Component thickness3.2 mm
    Package4032
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1004

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    What the Numbers Mean

    The chip is terminated with a silver-plated nickel barrier, so the solder joint is also the thermal path into the board. A generous pad is not cosmetic: it is what keeps the body temperature down at the continuous rating.

    The clamp column works out at 2.47 times the varistor voltage: 60 V at the rated current against 24.3~29.7 V at 1 mA. That ratio is what the downstream part has to survive, not the 24.3~29.7 V figure on the label.

    Standing at 22 V the leakage is at most 50 uA, which is 1.1 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 3.2 mm tall this is the part that has to fit under the enclosure. The 1.4 J rating and the 250 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS4032 family this is item 3 of 30 in the Eaton catalogue.

    Positioning in the Range

    Put it before the series ferrite or inductor, on the side that faces the cable. The order of the two components decides which one takes the surge.

    • Do not stack a chip varistor on a via-in-pad without filling it: the solder wicking changes the joint and the thermal path at the same time.
    • Reflow profile and pad geometry are in the data sheet; the part is not sensitive to moisture at the levels of a plastic package, but the solder joint is the thermal path.

    Frequently Asked Questions

    How much height does it add?
    The thickness column is the body height above the board, 3.2 mm for the low profile parts and up to 5.6 mm for the high voltage ones. That has to clear the enclosure before the part is designed in.

    Can it be reflow soldered?
    Yes, that is the point of the package. The recommended profile and pad geometry are in the data sheet, and the pad is also the thermal path, so a reduced pad raises the body temperature.

    What is the peak current rating for?
    It is the 8/20 microsecond single-shot current the body survives. The energy column is the better guide for a long pulse, because a 10/1000 microsecond waveform delivers far more joules at the same peak.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message