
| Parameter | Value |
|---|---|
| Orderable part number | MOVS4032V025 |
| Working voltage, RMS | 25 Vrms |
| Working voltage, DC | 31 Vdc |
| Varistor voltage at 1 mA | 35.1-42.9 V |
| Leakage current at 0.8 Vv | max. 50 uA |
| Clamping voltage, 8/20 us | 80 V at 2.5 A |
| Peak current, 8/20 us | 250 A |
| Maximum energy, 10/1000 us | 2.1 J |
| Rated power | 0.02 W |
| Typical capacitance at 1 kHz | 1300 pF |
| Component thickness | 4.2 mm |
| Package | 4032 |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +85 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, halogen free |
| Data sheet | Eaton Technical Data ELX1004 |
Dimensions, recommended pad or hole pattern and the derating curves are
on the data sheet pages; the package line above gives the body size as Eaton states it.
The chip is terminated with a silver-plated nickel barrier, so the solder joint is also the thermal path into the board. A generous pad is not cosmetic: it is what keeps the body temperature down at the continuous rating.
The clamp column works out at 2.28 times the varistor voltage: 80 V at the rated current against 35.1~42.9 V at 1 mA. That ratio is what the downstream part has to survive, not the 35.1~42.9 V figure on the label.
Standing at 31 V the leakage is at most 50 uA, which is 1.55 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.
At 4.2 mm tall this is the part that has to fit under the enclosure. The 2.1 J rating and the 250 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.
Within the MOVS4032 family this is item 5 of 30 in the Eaton catalogue.
Put it before the series ferrite or inductor, on the side that faces the cable. The order of the two components decides which one takes the surge.
Is the SMD part a drop-in for a radial disc?
Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.
How much height does it add?
The thickness column is the body height above the board, 3.2 mm for the low profile parts and up to 5.6 mm for the high voltage ones. That has to clear the enclosure before the part is designed in.
Can it be reflow soldered?
Yes, that is the point of the package. The recommended profile and pad geometry are in the data sheet, and the pad is also the thermal path, so a reduced pad raises the body temperature.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd