Eaton MOVS4032V030 SMT Varistor, 250 A Peak
Eaton MOVS4032V030 SMT Varistor, 250 A Peak

Eaton MOVS4032V030 SMT Varistor, 250 A Peak

Share
MOVS4032V030: surface mount metal oxide varistor, 42.3-51.7 V varistor voltage, 38 V working, 104 V clamp, 1060 pF, 2.5 J.
    • Product Details
    • Download

    Eaton MOVS4032V030 SMT Varistor, 250 A Peak

    MOVS4032V030 at a glance: surface mount metal oxide varistor, 42.3-51.7 V varistor voltage, 38 V working, 104 V clamp, 1060 pF, 2.5 J.

    Key Specifications

    ParameterValue
    Orderable part numberMOVS4032V030
    Working voltage, RMS30 Vrms
    Working voltage, DC38 Vdc
    Varistor voltage at 1 mA42.3-51.7 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us104 V at 2.5 A
    Peak current, 8/20 us250 A
    Maximum energy, 10/1000 us2.5 J
    Rated power0.02 W
    Typical capacitance at 1 kHz1060 pF
    Component thickness4.2 mm
    Package4032
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1004

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    What the Numbers Mean

    The chip is terminated with a silver-plated nickel barrier, so the solder joint is also the thermal path into the board. A generous pad is not cosmetic: it is what keeps the body temperature down at the continuous rating.

    The clamp column works out at 2.46 times the varistor voltage: 104 V at the rated current against 42.3~51.7 V at 1 mA. That ratio is what the downstream part has to survive, not the 42.3~51.7 V figure on the label.

    Standing at 38 V the leakage is at most 50 uA, which is 1.9 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 2.5 J rating and the 250 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS4032 family this is item 6 of 30 in the Eaton catalogue.

    Where This Series Fits

    Put it before the series ferrite or inductor, on the side that faces the cable. The order of the two components decides which one takes the surge.

    • Reflow once. A second pass reflows the termination and can crack the ceramic at the silver-nickel barrier.
    • Tape and reel orientation follows EIA, and the parts are supplied in the quantities the data sheet lists – worth checking before a production run.

    Frequently Asked Questions

    Is the SMD part a drop-in for a radial disc?
    Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.

    How much height does it add?
    The thickness column is the body height above the board, 3.2 mm for the low profile parts and up to 5.6 mm for the high voltage ones. That has to clear the enclosure before the part is designed in.

    Can it be reflow soldered?
    Yes, that is the point of the package. The recommended profile and pad geometry are in the data sheet, and the pad is also the thermal path, so a reduced pad raises the body temperature.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products