Eaton MOVS4032V050 SMD Metal Oxide Varistor 135 V
Eaton MOVS4032V050 SMD Metal Oxide Varistor 135 V

Eaton MOVS4032V050 SMD Metal Oxide Varistor 135 V

Share
MOVS4032V050: surface mount metal oxide varistor, 73.8-90.2 V varistor voltage, 66 V working, 135 V clamp, 490 pF, 5.5 J.
    • Product Details
    • Download

    Eaton MOVS4032V050 SMD Metal Oxide Varistor 135 V

    MOVS4032V050 at a glance: surface mount metal oxide varistor, 73.8-90.2 V varistor voltage, 66 V working, 135 V clamp, 490 pF, 5.5 J.

    Ratings at a Glance

    ParameterValue
    Orderable part numberMOVS4032V050
    Working voltage, RMS50 Vrms
    Working voltage, DC66 Vdc
    Varistor voltage at 1 mA73.8-90.2 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us135 V at 10 A
    Peak current, 8/20 us1200 A
    Maximum energy, 10/1000 us5.5 J
    Rated power0.25 W
    Typical capacitance at 1 kHz490 pF
    Component thickness3.2 mm
    Package4032
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1004

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    What the Numbers Mean

    On a dense board the SMD varistor competes with the connector for space, and the part is usually placed on the incoming side of the first filter. That position is chosen for the current path, not for convenience.

    The clamp column works out at 1.83 times the varistor voltage: 135 V at the rated current against 73.8~90.2 V at 1 mA. That ratio is what the downstream part has to survive, not the 73.8~90.2 V figure on the label.

    Standing at 66 V the leakage is at most 50 uA, which is 3.3 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 3.2 mm tall this is the part that has to fit under the enclosure. The 5.5 J rating and the 1200 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS4032 family this is item 9 of 30 in the Eaton catalogue.

    What This Family Is For

    Put it before the series ferrite or inductor, on the side that faces the cable. The order of the two components decides which one takes the surge.

    • The energy per unit volume is fixed by the body, so a lower profile in the same footprint always means less joule capability, not more.
    • Reflow profile and pad geometry are in the data sheet; the part is not sensitive to moisture at the levels of a plastic package, but the solder joint is the thermal path.

    Frequently Asked Questions

    What is the peak current rating for?
    It is the 8/20 microsecond single-shot current the body survives. The energy column is the better guide for a long pulse, because a 10/1000 microsecond waveform delivers far more joules at the same peak.

    Why is the capacitance so high?
    A 4032 body at 14 Vdc has a large electrode area and a thin dielectric, so the capacitance runs into thousands of picofarads. That is fine on a supply rail and not fine on a data line.

    Can two parts be paralleled for more energy?
    Only if they are matched, which they are not. The varistor voltage tolerance means one part takes most of the current, so the pair behaves like the weaker one plus a little.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products