Eaton MOVS4032V120 SMD Metal Oxide Varistor 300 V
Eaton MOVS4032V120 SMD Metal Oxide Varistor 300 V

Eaton MOVS4032V120 SMD Metal Oxide Varistor 300 V

Share
MOVS4032V120: surface mount metal oxide varistor, 170-207 V varistor voltage, 160 V working, 300 V clamp, 190 pF, 11.7 J.
    • Product Details
    • Download

    Eaton MOVS4032V120 SMD Metal Oxide Varistor 300 V

    MOVS4032V120 at a glance: surface mount metal oxide varistor, 170-207 V varistor voltage, 160 V working, 300 V clamp, 190 pF, 11.7 J.

    Electrical Specifications

    ParameterValue
    Orderable part numberMOVS4032V120
    Working voltage, RMS120 Vrms
    Working voltage, DC160 Vdc
    Varistor voltage at 1 mA170-207 V
    Leakage current at 0.8 Vvmax. 50 uA
    Clamping voltage, 8/20 us300 V at 10 A
    Peak current, 8/20 us1200 A
    Maximum energy, 10/1000 us11.7 J
    Rated power0.25 W
    Typical capacitance at 1 kHz190 pF
    Component thickness4.2 mm
    Package4032
    MountingSurface mount
    Operating temperature-40 °C to +85 °C
    QualificationCommercial grade
    RoHSCompliant, halogen free
    Data sheetEaton Technical Data ELX1004

    Dimensions, recommended pad or hole pattern and the derating curves are
    on the data sheet pages; the package line above gives the body size as Eaton states it.

    What the Numbers Mean

    The thickness column is the one that gets overlooked. A 4032 varistor is a 3.2 mm to 5.6 mm tall block, and that height has to clear the enclosure or the board-to-board gap before the part is designed in.

    The clamp column works out at 1.76 times the varistor voltage: 300 V at the rated current against 170~207 V at 1 mA. That ratio is what the downstream part has to survive, not the 170~207 V figure on the label.

    Standing at 160 V the leakage is at most 50 uA, which is 8 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.

    At 4.2 mm tall this is the part that has to fit under the enclosure. The 11.7 J rating and the 1200 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.

    Within the MOVS4032 family this is item 13 of 30 in the Eaton catalogue.

    Positioning in the Range

    The pad is the heatsink. Use the recommended land pattern even when the board is tight; a reduced pad raises the body temperature at the same continuous current.

    • Do not stack a chip varistor on a via-in-pad without filling it: the solder wicking changes the joint and the thermal path at the same time.
    • The termination is silver-nickel, so the parts are compatible with lead-free and tin-lead processes, but not with a second reflow at the same profile.

    Frequently Asked Questions

    Is the SMD part a drop-in for a radial disc?
    Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.

    How much height does it add?
    The thickness column is the body height above the board, 3.2 mm for the low profile parts and up to 5.6 mm for the high voltage ones. That has to clear the enclosure before the part is designed in.

    Can it be reflow soldered?
    Yes, that is the point of the package. The recommended profile and pad geometry are in the data sheet, and the pad is also the thermal path, so a reduced pad raises the body temperature.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message