
| Parameter | Value |
|---|---|
| Orderable part number | MOVS4032V300 |
| Working voltage, RMS | 300 Vrms |
| Working voltage, DC | 385 Vdc |
| Varistor voltage at 1 mA | 423-517 V |
| Leakage current at 0.8 Vv | max. 50 uA |
| Clamping voltage, 8/20 us | 775 V at 10 A |
| Peak current, 8/20 us | 1200 A |
| Maximum energy, 10/1000 us | 30 J |
| Rated power | 0.25 W |
| Typical capacitance at 1 kHz | 90 pF |
| Component thickness | 5.6 mm |
| Package | 4032 |
| Mounting | Surface mount |
| Operating temperature | -40 °C to +85 °C |
| Qualification | Commercial grade |
| RoHS | Compliant, halogen free |
| Data sheet | Eaton Technical Data ELX1004 |
Dimensions, recommended pad or hole pattern and the derating curves are
on the data sheet pages; the package line above gives the body size as Eaton states it.
On a dense board the SMD varistor competes with the connector for space, and the part is usually placed on the incoming side of the first filter. That position is chosen for the current path, not for convenience.
The clamp column works out at 1.83 times the varistor voltage: 775 V at the rated current against 423~517 V at 1 mA. That ratio is what the downstream part has to survive, not the 423~517 V figure on the label.
Standing at 385 V the leakage is at most 50 uA, which is 19.25 mW of continuous dissipation. Small, but it is why a varistor on a battery rail has to be chosen on leakage and not only on voltage.
At 5.6 mm tall this is the part that has to fit under the enclosure. The 30 J rating and the 1200 A peak come from a body that size, so a lower profile in the same footprint would mean less energy.
Within the MOVS4032 family this is item 23 of 30 in the Eaton catalogue.
The pad is the heatsink. Use the recommended land pattern even when the board is tight; a reduced pad raises the body temperature at the same continuous current.
Is the part halogen free?
Yes, the data sheet states halogen free and RoHS compliance without exemptions for the whole family.
Is the SMD part a drop-in for a radial disc?
Electrically it can be, at the same varistor voltage and energy. Mechanically it is not: the footprint, the height and the thermal path all change, and the SMD body has less mass to absorb the same pulse.
How much height does it add?
The thickness column is the body height above the board, 3.2 mm for the low profile parts and up to 5.6 mm for the high voltage ones. That has to clear the enclosure before the part is designed in.
Shenzhen Gaorunxin Technology Co., Ltd
Shenzhen Gaorunxin Technology Co., Ltd