Eaton MPI5451R1-1R0-R 1 uH Power Inductor, 4.2 A
Eaton MPI5451R1-1R0-R 1 uH Power Inductor, 4.2 A

Eaton MPI5451R1-1R0-R 1 uH Power Inductor, 4.2 A

Share
MPI5451R1-1R0-R: automotive power inductor, 1 uH , 4.2 A Irms, Isat 7.2 A, DCR 30 mOhm.
    • Product Details
    • Download

    Eaton MPI5451R1-1R0-R 1 uH Power Inductor, 4.2 A

    MPI5451R1-1R0-R at a glance: automotive power inductor, 1 uH , 4.2 A Irms, Isat 7.2 A, DCR 30 mOhm.

    Electrical Specifications

    ParameterValue
    Orderable part numberMPI5451R1-1R0-R
    Inductance1 uH
    DCR typical @ +20 °C30 mOhm
    Irms (DC, 40 °C rise)4.2 A
    Isat7.2 A
    K-factor622
    MountingSurface mount
    Operating temperature-40 °C to +125 °C
    QualificationCommercial grade
    RoHSCompliant, -R suffix
    Data sheetEaton Technical Data 10247

    Mechanical Dimensions & Pad Layout

    MPI5451R1-1R0-R mechanical dimensions and pad layout

    Drawing reproduced from Eaton Technical Data 10247: outline with
    rated mm dimensions, pad layout and marking.

    Reading the Data Sheet

    This is a surface-mount power inductor with a distributed-gap core. The energy is stored through the volume of the magnetic material rather than a single gap, which produces the gradual rolloff and keeps the fringing field small.

    At 4.2 A the winding dissipates about 0.529 W in copper using the typical DCR of 30 mOhm. That is the DC floor of the loss budget – ripple and core loss come on top.

    The core stores about 25.9 uJ at the saturation point, which is the energy available to bridge a load step.

    The K-factor of 622 converts inductance and ripple into flux swing; read the core-loss curve at that amplitude.

    Within the MPI5451R1 family this is value 3 of 11, in a range from 0.33 uH to 15 uH.

    What This Family Is For

    The MPIA family is the automotive miniature power range: AEC-Q200 qualified, low profile, in sizes from 2 mm to 4 mm, with both typical and maximum DCR quoted for every row.

    • DCR is quoted at +20 °C; copper rises about 0.4 % per °C, so the hot loss is higher than the cold figure.
    • Typical applications: handheld/mobile devices; portable media players; mp3 players; battery operated devices; notebook/netbook.
    • Design note: ripple from OCL, thermal from Irms, transient from Isat. Three numbers, three checks.

    Frequently Asked Questions

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Is the part shielded?
    The molded body encloses the winding, so the external field is small enough for dense layouts.

    What is the difference between Irms and Isat?
    Irms is the DC current for the rated temperature rise; Isat is the peak current at a defined inductance rolloff. A converter can exceed Irms briefly but must stay inside Isat.

    Shenzhen Gaorunxin Technology Co., Ltd

    Online message

    Shenzhen Gaorunxin Technology Co., Ltd

    Related Products